Measuring, warning and controlling device system in different versions. Applicable for large systems for monitoring and evaluation of up to 128 sensors and control of up to 32 relays.
For visualization of measurement data, parameters and statistics, in combination with GC-06 and PG2/PX2 Controller. The integrated network interface allows remote access.
Compact gas detector (plug & play) for the connection of up to 3 sensors. The device has 3 power relays, Modbus (BMS), analog output as standard. Optional with display and UPS.
The controller (9a) is designed for connecting up to 10 SB2Units (9b) via the local bus and can be parameterized and configured completely without a tool.
Gas measuring, warning and control board for connection of a MC2 X-Change sensor. The 2 relays are activated by alarm thresholds, which are adjustable by potentiometer.
For the provision of the measured values of up to 3 SC2 sensors on the GC-06 Controller or superior BMS.
Compact gas detector (plug & play) for the connection of up to 3 sensors, 2 of which with the same gases. Optionally the device can be equipped with display, 2 relays, Modbus and analog output.
Compact gas detector (plug & play) for the connection of up to 3 sensors. The device has 3 power relays, Modbus (BMS), analog output as standard. Optional with display and UPS.
The module is used as a remote display of the measured values and alarms from different measuring points outside the danger zone (e.g. entrances). Values can be shown with the help of the display and keyboard.
The module reliably indicates whether an alarm is present and if the area is safe or not. The module is especially suitable for doors of monitored areas. The LEDs in time warn of dangers, thus ensuring a particularly quick assessment of the danger.
Analog exchangeable sensor with 4-20 mA / 2-10 V output and simple, integrated, digital calibration routine using a tool.
Analog exchangeable sensor with 4-20 mA / 2-10 V output and simple, integrated, digital calibration routine using a tool.
Digital exchangeable sensor with local bus provides information on calibration interval and lifetime in addition to the measured value. Digital signature of the sensor for a clear assignment with the connected board.
Digital exchangeable sensor with local bus provides information on calibration interval and lifetime in addition to the measured value. Digital signature of the sensor for a clear assignment with the connected board.
Digital exchangeable sensor with local bus provides information on calibration interval and lifetime in addition to the measured value. Digital signature of the sensor for a clear assignment with the connected board.
Digital exchangeable sensor with local bus provides information on calibration interval and lifetime in addition to the measured value. Digital signature of the sensor for a clear assignment with the connected board.
Digital exchangeable sensor with local bus provides information on calibration interval and lifetime in addition to the measured value. Digital signature of the sensor for a clear assignment with the connected board.
Analog exchangeable sensor with 4-20 mA / 2-10 V output and simple, integrated, digital calibration routine using a tool.
The SB2Unit has a built in sensor, the so called SC2, and is a slave device that saves pre-configured alarm thresholds. These can be edited on the display of the Compact Controller. The registration of the SB2Unit takes place via a button that connects the board automatically to the controller. Since this is a special software, the SB2Unit is not part of the standard SB2 series.
The SB2Unit has a built in sensor, the so called SC2, and is a slave device that saves pre-configured alarm thresholds. These can be edited on the display of the Compact Controller. The registration of the SB2Unit takes place via a button that connects the board automatically to the controller. Since this is a special software, the SB2Unit is not part of the standard SB2 series.
Various accessories for calibration, parameterization of MSR products, as well as warning devices for visual and acoustic display of alarms.
Measuring, warning and controlling device system in different versions. Applicable for large systems for monitoring and evaluation of up to 128 sensors and control of up to 32 relays.
For visualization of measurement data, parameters and statistics, in combination with GC-06 and PG2/PX2 Controller. The integrated network interface allows remote access.
Gas detector with certification for ATEX and IECEx Zone 1/2 and SIL2, signal transmission via display, relay, Modbus or analog output.
Gas detector with certification for ATEX and IECEx Zone 1/2 and SIL2, signal transmission via display, relay, Modbus or analog output.
Compact gas detector (plug & play) for the connection of up to 3 sensors, 2 of which with the same gases. Optionally the device can be equipped with display, 2 relays, Modbus and analog output.
Digital exchangeable sensor with local bus for use in PX2. In addition to the measured value, it provides information on the calibration interval and lifetime. Certified for ATEX and IECEx Zone 1/2 and SIL2.
Innovative, remote sensor probe for connection to the WSB2 board for use in ATEX and IECEx Zone 1/2 and SIL2. In addition to the measured value, the probe provides information on calibration interval and lifetime.
Innovative, remote sensor probe for connection to the WSB2 board for use in ATEX and IECEx Zone 1/2 and SIL2. In addition to the measured value, the probe provides information on calibration interval and lifetime.
Gas detector with certification for ATEX and IECEx Zone 1/2 and SIL2, signal transmission via display, relay, Modbus or analog output.
Various accessories for calibration, parameterization of MSR products, as well as warning devices for visual and acoustic display of alarms.
Autonomous, menu-driven tool for convenient addressing, parameter settings and calibration of the devices for the PolyGard®2 and PolyXeta®2 product series. Communication and power supply take place via a cable that is connected to the respective devices.
Autonomous, menu-controlled PC tool for convenient addressing, parameter setting and calibration of the devices for the PolyGard®2 and PolyXeta®2 product series. Communication with the PC takes place via the supplied USB-RS-485 and USB / TTL adapter. The supply and data coupling with galvanic isolation to the devices takes place via a cable with a plug connection.